The DeepCool FL12R White is a 3-pack of 120mm ARGB fans for PC builders who want an uninterrupted lighting look from intake or exhaust. Reversed blades remove the cross on the back, while 36 ARGB LEDs per fan and a long-life fluid dynamic bearing deliver up to 55 CFM of rated airflow.
| Brand | DeepCool |
| Model | FL12R WH 3 IN 1 |
| Part number | R-FL12R-WHAPN3-G |
| Fans included | 3 |
| Fan dimensions | 120 x 120 x 25mm (L x W x H) |
| Net weight | 543g |
| Fan speed | 500 to 2150 RPM ±10% |
| Airflow | 55 CFM |
| Air pressure | 2.59 mmAq |
| Noise | 33.9 dB(A) or less |
| Fan connector | 4-pin PWM |
| Bearing type | Fluid dynamic bearing |
| Fan rated voltage | 12 VDC |
| Fan rated current | 0.15A |
| Fan power consumption | 1.8W |
| LED type | Addressable RGB LED |
| LED connector | 3-pin (+5V-D-G) |
| LED rated voltage | 5 VDC |
| LED power consumption | 2.75W |
The spec table lists a 4-pin PWM fan connector and a 3-pin (+5V-D-G) ARGB connector. Check that your motherboard or controller supports both before buying. DeepCool does not list specific motherboard models on this product page.
Three FL12R WH fans are included in the package.
The reversed blade removes the cross on the back side, so the lighting stays uninterrupted whether the fan is used for intake or exhaust.
DeepCool rates them at 33.9 dB(A) or less, with speed ranging from 500 to 2150 RPM ±10%.
Yes, see the DeepCool FL12 SE 120mm ARGB fan, which has 20 addressable LEDs and a hydro bearing.