The DeepCool FL12 SE is a 120mm ARGB fan for PC builders who want bright lighting with PWM-controlled airflow. Twenty individually addressable RGB LEDs sync through supported motherboard software, while a long-life hydro bearing and 50.74 CFM of rated airflow support everyday case cooling.
| Brand | DeepCool |
| Model | FL12 SE |
| Part number | R-FL12SE-BKAPN1-G |
| Dimensions | 120 x 120 x 25mm (L x W x H) |
| Net weight | 172g |
| Fan speed | 400 to 1900 RPM ±10% |
| Airflow | 50.74 CFM |
| Air pressure | 2.04 mmAq |
| Noise | 28.67 dB(A) or less |
| Fan connector | 4-pin PWM |
| Bearing type | Hydro bearing |
| Fan rated voltage | 12 VDC |
| Fan rated current | 0.10A |
| Fan power consumption | 1.2W |
| LED type | Addressable RGB LED |
| LED connector | 3-pin (+5V-D-G) |
| LED rated voltage | 5 VDC |
| LED power consumption | 3.5W |
The FL12 SE uses a 4-pin PWM fan connector and a 3-pin (+5V-D-G) ARGB connector. Check that your motherboard or controller has both before buying. DeepCool does not list specific motherboard models on this product page.
It has 20 individually addressable RGB LEDs, powered by a 3-pin +5V connector.
DeepCool rates it at 28.67 dB(A) or less, with speed ranging from 400 to 1900 RPM ±10%.
It is 120 x 120 x 25mm and weighs 172g.
Yes, a three-fan white option is the DeepCool FL12R White 120mm 3-Pack, which uses a fluid dynamic bearing and reversed blades.