The Brother CZ-1004 is a genuine 25mm x 5m continuous label roll made for the Brother VC-500W Colour Label Printer — a full-colour, ink-free label cassette, not a P-touch tape.
This roll is built exclusively for the Brother VC-500W Versatile Compact Colour Label and Photo Printer. It does not fit Brother P-touch label makers, which use separate TZe tape cassettes. If you're not sure which device you have, check the model number printed on the front of the printer before ordering.
The CZ-1004 uses Brother's ZINK Zero Ink technology. The colour is embedded directly in the paper itself, so the VC-500W prints full-colour labels without ink, toner, or a ribbon. You load the roll and print — there's no separate cartridge to buy or replace.
One CZ-1004 label roll cassette, ready to load directly into the VC-500W. No separate ink, toner or ribbon needed.
If your printer is a Brother VC-500W and you need the 25mm width, this is the correct genuine cassette for it — not a universal or third-party substitute. Because the colour lives in the paper rather than a separate cartridge, there's no risk of ordering the wrong ink or toner type for this printer.
No. The CZ-1004 is made only for the Brother VC-500W — P-touch label makers use separate TZe tape cassettes.
The Brother VC-500W Colour Label and Photo Printer only.
No. It uses ZINK Zero Ink technology — the colour is built into the paper itself.
It's a genuine Brother label roll, not a third-party or remanufactured version.
Each roll is 25mm x 5m continuous — roughly 100 labels at 5cm each, or 50 at 10cm each.
Width. CZ-1004 is 25mm; the same printer also takes 9mm, 12mm, 19mm and 50mm rolls.
Yes — water, tear and smudge resistant, with an adhesive backing.
Currently sold as a single roll only.