The ASUS Prime Radeon RX 9070 XT OC Edition is a 16GB GDDR6 graphics card for high-resolution PC gaming and creative work, with an OC-mode boost clock up to 3030MHz and a 2.5-slot triple-fan cooler that ASUS says suits small-form-factor builds. It's built for gamers moving to AMD's RDNA 4 generation.
| Model | ASUS Prime Radeon RX 9070 XT OC Edition (PRIME-RX9070XT-O16G) |
| Graphics engine | AMD Radeon RX 9070 XT |
| Bus standard | PCI Express 5.0 |
| Video memory | 16GB GDDR6, 20Gbps, 256-bit |
| Engine clock (OC mode) | Boost up to 3030MHz, game clock up to 2480MHz |
| Engine clock (default mode) | Boost up to 3010MHz, game clock up to 2460MHz |
| Stream processors | 4,096 |
| Outputs | 1 x HDMI 2.1b, 3 x DisplayPort 2.1a |
| Max displays / resolution | 4 / 7680 x 4320 |
| HDCP | 2.3 |
| OpenGL | 4.6 |
| Power connectors | 3 x 8-pin |
| Recommended PSU | 750W |
| Slot / dimensions | 2.5-slot, 312 x 130 x 50 mm |
| CrossFire | Not supported |
| Software | ASUS GPU Tweak III (download from ASUS support) |
| In the box | Quick setup manual, thank-you card |
You need a motherboard with a free PCI Express graphics slot (the card is PCIe 5.0), room for a 312mm-long, 2.5-slot card, and a power supply of at least 750W with three 8-pin PCIe power connectors. If you are upgrading your power supply, check the connector list on an 850W unit such as the Thermaltake Toughpower GT 850W. ASUS notes the 750W figure assumes a fully overclocked CPU and GPU system.
ASUS recommends a 750W power supply, and the card uses three 8-pin power connectors.
It measures 312 x 130 x 50 mm and takes up 2.5 slots.
Yes. All three fans stop when the GPU is below 55°C and start again above 60°C.
Up to 4, using its 1 HDMI 2.1b and 3 DisplayPort 2.1a outputs.
Compare it with the ASUS TUF Gaming RX 9070 XT OC or browse the full ASUS range.